HP Mini 210-2000 Getting Started page 53

CAUTION: To prevent damage to the memory module, hold the memory module by the edges
only. Do not touch the components on the memory module.
a. Align the notched edge (1) of the memory module with the tab in the memory module slot.
b. With the memory module at a 45-degree angle from the surface of the memory module
compartment, press the module (2) into the memory module slot until it is seated.
c. Gently press the memory module (3) down, applying pressure to both the left and right
edges of the memory module, until the retention clips snap into place.
CAUTION:
memory module.
5. Replace the vanity cover (see
6. Replace the battery (see
7. Reconnect external power and external devices.
8. Turn on the computer.
To prevent damage to the memory module, be sure that you do not bend the
Replacing the vanity cover on page
Inserting the battery on page
40).
38).
Replacing the memory module
45