GE Profile Series Owner's Manual & Installation Instructions page 13

LEVEL
3
legs and raise or lower the product.
and plumb with cabinetry, and should align with
adjacent toekick height.
If you skipped Step 2:
depending on door swing.
• Peel backing off the tape inside the decorative
hinge cover. Press and snap into position.
49-60466-6
Installation Instructions
Turn Right to Lower
Turn Left to Raise
CONNECT POWER
4
• Connect power cord plug to a properly grounded
receptacle.
• Make sure power is on by opening the door to
see if interior light turns on.
SLIDE PRODUCT INTO THE
5
CUTOUT
• Carefully slide the unit into the opening. Be
careful not to entangle power cord.
the surrounding cabinets.
• Check again to be sure the unit is level.
SET TEMPERATURE
6
CONTROLS
• The temperature controls are preset. Refer
to the Temperature Control section for more
information. Allow 24 hours for temperature to
13