GE Profile Series Owner's Manual & Installation Instructions page 11

TOOLS REQUIRED
• #2 Phillips screwdriver
• Adjustable wrench
PARTS SUPPLIED
• Hardware for changing door swing
• Left and right side hinge covers
• Top screw hole cover
GROUNDING THE BEVERAGE
CENTER AND WINE CHILLER
WARNING
Hazard.
For personal safety, this appliance
must be properly grounded.
The power cord of this appliance is equipped
with a three-prong (grounding) plug which mates
with a standard three-prong (grounding) wall
Have the wall outlet and circuit checked by a
qualified electrician to make sure the outlet is
properly grounded.
Where a standard 2-prong wall outlet is
encountered, it is your personal responsibility
and obligation to have it replaced with a properly
grounded 3-prong wall outlet.
THIS APPLIANCE.
49-60466-6
Installation Instructions
Electrical Shock
STAINING WOOD DRAWER
FRONTS
The drawer fronts are unfinished beech wood.
stain the wood.
• The drawer fronts may be stained and sealed to
match adjacent cabinetry. The tinted glass will
make the stained wood appear darker. A true
color match can be seen only when the door is
opened.
• Apply the stain and sealer according to the
manufacturer's instructions. To avoid unpleasant
odor, keep the door open to ventilate and allow
the stain/sealer to dry completely before using
the product.
REMOVE PACKAGING
1
• Remove corner blocks and foam drawer stops.
• Remove all packing material, tape and protective
plastic coverings.
WARNING
for children. Remove and discard any parts not
used.
11