Rj-1 1 Connector - HP G61-306 Maintenance And Service Manual

RJ-1 1 connector

Before removing the RJ-11 connector, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Optical drive (see
b. Hard drive (see
c. Keyboard (see
d. Switch cover (see
e. Power button board (see
f. Display assembly (see
g. Top cover (see
Maintenance and Service Guide
"Battery" on page
"Optical drive" on page
"Hard drive" on page 4-10)
"Keyboard" on page 4-17)
"Switch cover" on page
"Power button board" on page
"Display assembly" on page
"Top cover" on page 4-30)
4-7).
4-8)
4-20)
4-22)
4-23)
Removal and replacement procedures
4–45