Rj-11 Connector Assembly - HP ProBook 4520s Maintenance And Service Manual

RJ-11 connector assembly

NOTE:
603188-001 for 17.3-in computers and 599807-001 for 15.6-in computers.
Before removing the RJ-11 connector assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5.
Remove the switch cover and keyboard (see
6.
Remove the optical drive (see
7. Remove the power button board cable (see
8.
Remove the speakers (see
9. Remove the thermal shield (see
10.
Remove the display assembly (see
on page 89
11. Remove the palm rest (see
12.
Remove the hard drive (see
13. Remove the top cover (see
Remove the RJ-11 connector assembly:
1.
Position the computer right-side up with the right side toward you.
2. Disconnect the cable from the system board (1) and remove the cable from the routing channel in
the base enclosure.
Downloaded from LpManual.com Manuals
The RJ-11 connector assembly is included in the Base Cable Kit, spare part number
Battery on page
Speakers on page
or Display assembly on computers with 15.6-in displays on page
Palm rest on page
Hard drive on page
Top cover on page
55).
Switch cover and keyboard on page
Optical drive on page 61).
Power button board on page
65).
Thermal shield on page
Display assembly on computers with 17.3-in displays
84).
87).
103).
63).
67).
96).
Component replacement procedures 119
56).