Table of Contents
Advertisement
Under normal circumstances, the battery life of helmet is up to 5
hours for temperature measurement ; and the battery life will be shortened
to 3~4 hours in heavy load modes when the visible light camera and
infrared thermal imaging module work at the same time, e.g. in the license
plate recognition or QR code recognition mode. A possible cause for the
significant shorter battery life is that the battery is not fully charged.
The blue light lighting up shows the battery in trickle charging mode,
when charging the helmet battery either with a dock charger or a cable
charger. At this time, it takes another 30 minutes to fully charge the battery.
6.1.6. No headphones output
1) Adjust volume key on the smart helmet, check the volume setting
not set to mute.
2) If the volume setting is normal, check the appearance of the
headphones for damage. If the headphones are damaged, please
contact the after-sales service for replacement.
3) If the headphones are not damaged, reboot the system and try
again.
4) If the problem cannot be solved after system reboot, please contact
after-sales service.
6.2. Functional and Operational FAQ
6.2.1. Questions about battery
1) Q: Does the smart helmet have to be turned off to recharge?
A: Yes, according to the helmet
turned off to charge
2) Q: How could I check the battery level when the helmet is power
off?
A: You can view the current battery level on the AR glasses screen
during the charging process when the power is off.
6.2.2. Questions about starting the helmet
1) Q: What color is the indicator light?
A: The indicator is red when the battery is not fully red, while it
turns blue when the battery is fully charged.
2) Q: How long do I need to press the power button to boot?
A: Press and hold for 3 seconds to boot.
'
s protection design, it must be
29
Advertisement
Table of Contents
