Table of Contents
Advertisement
bar , and the system will exit the projection mode;
STEP 5: Select
helmet storage folder, and then open the file path of the face database:
KcFace\register;
STEP 6: Copy the face pictures into this folder.
STEP 7: Disconnect the helmet with the computer;
STEP 8: Reconnect the thermal imaging module and the helmet.
The built-in APP of the helmet will automatically load the face data.
Face recognition can be performed after data loading.
4.7. Projection display
During system settings, data importing/exporting or product
demonstration, the AR display screen can be projected to the
Windows desktop computer by steps as described below:
STEP 1: Install projection software.
Extract "Scrcpy" to the computer desktop or the root directory of
the driver disk;
STEP 2: Connect the helmet with the computer.
Turn on the smart helmet, unplug the connection cable between
the thermal imaging module and the computer, and plug the included
TYPE-C data cable to connect the computer and the smart helmet.
STEP 3: Projection
"
Open
Scrcpy
screen;
4.8. Screen Recording
4.8.1. Screen Recording
"
Use
KC Smart Helmet
recording. The screen display in the current mode can be recorded as
a MP4 format video, and saved in the helmet SD memory card.
Follow these steps: Connect the
"
helmet, click
Start Recording
"
and click
End Recording
4.8.2. Export Video
"
"
KCPH2
in
"
, and project the AR display to the computer
"
APP to operate the helmet for screen
"
at the bottom of any page to start ,
"
to end .
25
"
My Computer
"
KC Smart Helmet
"
to open the
"
APP to the
Advertisement
Table of Contents
