e.
Remove the hinges (3). The hinge covers are available using spare part number
604063-001. The hinges are available using spare part number 603778-001.
12.
If it is necessary to replace the wireless antenna cables and transceivers:
a.
Release the wireless antenna cables from the clips and routing channel built into the display
enclosure.
b.
Release the two pieces of tape that secure the wireless antenna cables to the display
enclosure.
c.
Release the tabs built into the display enclosure that secure the wireless antenna cables.
d.
Remove the two Phillips PM2.0×4.0 screws that secure the wireless antenna transceivers to
the display enclosure.
76
Chapter 4 Removal and replacement procedures