Category
3D support
Memory
Hard drives
2
Chapter 1 Product description
Description
Emitter controller chip for LCD blanking and shutter glass modulation
3D display with 4-lane embedded DisplayPort (eDP) interface
Cyberlink 3D player in MediaSmart
Shutter glasses with integrated infrared receiver
2 customer-accessible/upgradable memory module slots
Supports dual-channel memory
Supports up to 8192 GB of system RAM
DDR3 1333-MHz, PC3-10600
1333-MHz bus speed on computer models equipped with Quad Core processors
1066-MHZ bus speed on computer models equipped with Dual Core and Core Duo processors
Supports the following configurations:
●
8192-MB total system memory (4096 × 2)
●
6144-MB total system memory (4096 × 1 + 2048 × 1)
●
4096-MB total system memory (4096 × 1)
●
4096-MB total system memory (2048 × 2)
Supports 6.35-cm (2.5-in) hard drives (HD), 12.5-mm (.49-in) and 9.5-mm (.37-in) thicknesses
Customer-accessible
Supports dual hard drive configuration, including solid-state drive (SSD)
Serial ATA
Accelerometer (HP Mobile Data Protection System 3D) RAID 0/1 Support
Supports the following dual hard drive configurations:
●
2 TB: 1-TB HD (5200-rpm, 12.5-mm) × 2
●
1500 GB: 750-GB HD (5200-rpm, 12.5-mm) × 2
●
1280 GB: 640-GB HD (7200-rpm, 9.5-mm) × 2
●
1280 GB: 640-GB HD (5400-rpm, 9.5-mm) × 2
●
1000 GB: 500-GB HD (7200-rpm, 9.5-mm) × 2
●
800 GB: 160-GB SSD + 640-GB HD (7200-rpm, 9.5-mm)
●
800 GB: 160-GB SSD + 640-GB HD (5400-rpm, 9.5-mm)
●
660 GB: 160-GB SSD + 500-GB HD (7200-rpm, 9.5-mm)
●
640 GB: 320-GB HD (7200-rpm, 9.5-mm) × 2