Specifications - Makita DUC252 Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Battery indicator
4-1. Lock-off button
4-2. Switch trigger
5-1. Front hand guard
5-2. Lock
5-3. Unlock
6-1. Adjusting screw
8-1. Sprocket cover
8-2. Lever
9-1. Adjusting dial
10-1. Sprocket
11-1. Adjusting pin
12-1. Hole
12-2. Guide bar

SPECIFICATIONS

Standard guide bar
Standard saw chain
Sprocket
Overall length (without guide bar)
Net weight
Chain speed per minute
Chain oil tank volume
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
*1 Weight, with largest battery cartridge, without guide bar and chain, empty oil tank, according to EN ISO 11681-2.
*2 Weight, with battery cartridge, guide bar, and chain, filled oil tank, according to EPTA-Procedure 01/2003.
WARNING: Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may result.
Explanation of general view
13-1. Sprocket cover
13-2. Lever
14-1. Sprocket cover
14-2. Lever
15-1. Loosen
15-2. Tighten
15-3. Adjusting dial
15-4. Guide bar
15-5. Saw chain
16-1. Sprocket cover
16-2. Lever
18-1. Oil tank cap
18-2. Oil inspection window
( for refilling the tank with oil)
18-3. Oil inspection window
20-1. Spike bumper
28-1. Felling area
31-1. Felling direction
Model
Guide bar length
Cutting length
Type
Type
Pitch
Gauge
No. of drive links
Number of teeth
Pitch
*1
*2
Rated voltage
DUC252
250 mm
23 cm
Sprocket nose bar
91PX
9.5 mm (3/8")
1.3 mm (0.05")
40
6
9.5 mm (3/8")
4.6 kg
8.3 m/s (500 m/min)
D.C. 36 V
5
31-2. Danger zone
31-3. Escape route
32-1. Guide bar cover
32-2. Battery cover
34-1. Cutting length
34-2. Distance between cutting edge
and depth gauge
34-3. Minimum 3 mm
35-1. Side plate angle
40-1. Slotted screwdriver
41-1. Sprocket
41-2. Locking ring
42-1. Locking ring
42-2. Sprocket
43-1. Limit mark
44-1. Brush holder cap
44-2. Screwdriver
24 cm
Carving bar Sprocket nose bar
25AP
6.35 mm (1/4") 9.5 mm (3/8")
1.3 mm (0.05") 1.1 mm (0.043")
60
9
6.35 mm (1/4") 9.5 mm (3/8")
316 mm
4.1 kg
3
85 cm
D.C. 36 V
DUC302
300 mm
28 cm
90PX
46
6
4.7 kg