Table of Contents
Advertisement
10
4.4
MEDIA
A.
Place lava or ember rock around the base of the appliance, making sure not to block any burner ports
or valve access. Retain a small amount of lava rock for step 3 and if applicable step 4.
B.
Place formed charcoal lumps around the front and sides of the appliance.
C.
Use remaining lava or ember rock to blend with the charcoal lumps.
D.
GL30 ONLY: Sprinkle remaining lava rock onto the outer fi bre ember beds to hide the seam.
IMPORTANT: DO NOT COVER FRONT SLOTS BENEATH THE ANDIRONS WITH MEDIA.
GL 18
4.5
LOGO PLACEMENT
Remove the backing of the logo supplied. Centre the logo
on the front of the appliance, ½" in from the left side, as
shown.
W415-1071 / C / 01.11.12
GL 24
½"
GL 30
½"
Advertisement
Table of Contents
