To remove a hard drive from the upgrade bay:
1.
Save your work.
2.
Shut down the computer and close the display.
3.
Disconnect all external hardware devices connected to the computer.
4.
Unplug the power cord from the AC outlet.
5.
Turn the computer upside down on a flat surface, with the upgrade bay toward you.
6.
Remove the battery (see
7.
Remove the bottom cover (see
8.
Remove the hard drive screws from the upgrade bay.
9.
Loosen the upgrade bay screw (1).
10.
Using a flat-bladed screwdriver, gently push the tab to release the hard drive (2).
11.
Remove the hard drive from the upgrade bay (3).
42
Chapter 6 Maintenance
Inserting or removing the battery on page
Removing the bottom cover on page
36).
38).