Table of Contents
Advertisement
Adding or replacing memory modules
The computer has two memory module slots. The memory module slots are located on the bottom of
the computer under the hard drive cover. The memory capacity of the computer can be upgraded by
adding a memory module or replacing the existing memory module in one of the memory module
slots.
WARNING!
cord and remove all batteries before installing a memory module.
CAUTION:
any procedure, ensure that you are discharged of static electricity by touching a grounded metal
object.
To add or replace a memory module:
CAUTION:
Shut down the computer before adding or replacing memory modules. Do not remove a memory
module while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
1.
Save your work and shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Unplug the power cord from the AC outlet.
4.
Turn the computer upside down on a flat surface.
5.
Remove the battery from the computer.
NOTE:
6.
Slide the battery release latch (1) until the cover is released, and then lift up and remove the
cover (2).
To reduce the risk of electric shock and damage to the equipment, unplug the power
Electrostatic discharge (ESD) can damage electronic components. Before beginning
To prevent information loss or an unresponsive system:
For more information, refer to the section
Inserting or removing the battery on page
Adding or replacing memory modules
30.
35
Advertisement
Table of Contents
