Display Assembly - HP Compaq Presario,Presario V6500 Maintenance And Service Manual

Display assembly

Description
15.4-inch, WXGA, BrightView display assembly (includes microphones)
15.4-inch, WXGA, BrightView display assembly with plain top for computer models with AMD
processors (includes microphones)
Before removing the display assembly, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Disconnect the WLAN antenna cables from the WLAN module (see
5.
Remove the following components:
6.
Switch cover (see
a.
Keyboard (see
b.
Remove the display assembly:
Disconnect the display panel cable (1) from the system board.
1.
Disconnect the microphone cable (2) from the power button board.
2.
Remove the wireless antenna cables (3) from the clips in the top cover.
3.
CAUTION:
the display assembly can result in damage to the display assembly and other computer components.
Battery on page
Switch cover on page
Keyboard on page
Support the display assembly when removing the following screws. Failure to support
42).
53)
55)
Component replacement procedures
Spare part number
446485-001
455196-001
WLAN module on page 48).
59