Table of Contents
Advertisement
Problem
Appliance is not level.
Cannot move appliance easily.
Appliance must be accessible for
service.
Oven light does not work.
Cause / Solution
Other Problems
Be sure the floor is level, strong, and stable enough to adequately support the range.
If the floor is sagging or sloping, contact a carpenter to correct the situation.
Poor installation. Place the oven rack in the center of the oven. Place a level on the
oven rack. Adjust the leveling legs at the base of the appliance until the rack is level.
Kitchen cabinet alignment may make range appear not level. Be sure cabinets are
square and have sufficient room for appliance clearance.
Cabinets not square or are built in too tightly. Contact the builder or installer to make
the appliance accessible.
Carpet interferes with appliance. Provide sufficient space so the appliance can be
lifted over carpet. Installation over carpet is not advised. See the installation instruc-
tions for guidelines specific to your appliance.
Be sure the oven light is secure in the socket. See
page
39.
BEFORE YOU CALL
"Replacing the Oven Light"
on
43
Advertisement
Table of Contents
