HP Compaq Presario,Presario V2600 Maintenance And Service Manual page 122

Removal and Replacement Procedures
✎
The wireless antenna transceivers and cables are included with
the display enclosure, spare part number 412351-001.
29. If it is necessary to replace the wireless transceivers and
cables, remove the two Phillips PM2.0×3.0 screws 1 that
secure the left and right transceivers to the display enclosure.
30. Release the retention tabs 2 built in to the display enclosure
lining that secure the wireless antenna cables to the display
enclosure.
31. Detach the wireless antenna transceivers 3 from the display
enclosure.
32. Remove the wireless antenna transceivers and cables 4.
Removing the Wireless Antenna Transceivers and Cables
Reverse the above procedure to reassemble and install the
display assembly
5–36 Maintenance and Service Guide