Automatically Switch The Tv To Standby; (Sleeptimer); Automatically Switch The Tv On (Start Time); Automatically Switch The Tv Off (Stop Time) - Sharp LC-26SB25S Operation Manual

tV menu

automatically switch the tV to standby

(Sleeptimer)

Sleeptimer switches the TV to standby after a defined
period of time�
1�
Press menu on the remote control and select
Features > timer > Sleeptimer.
2�
Press ≥ to enter the Sleeptimer menu
3�
Press < or > to set the sleep time up to 180
minutes in steps of five minutes. If set to zero
minutes, the Sleeptimer is switched off.
4�
Press oK to activate the Sleeptimer.
note
• You can always switch off your TV earlier or reset Sleeptimer
during the countdown�
automatically switch the tV on
(Start time)
Start time switches the TV to a specified channel at a
specified time, from standby�
1�
menu on the remote control and select
Press
Features > timer > Start time.
2�
Press ≥ to enter the start time menu.
3�
Use < or >, ≥ or ≤ to select and enter the menu
items to set.
4�
Press oK to confirm your choice.
5�
menu to exit.
Press
note
• To switch off Start time, select off in the Start time menu�
automatically switch the tV off
(Stop time)
Stop time switches the TV to standby at a specified
time�
1�
menu on the remote control and select
Press
Features > timer > Stop time.
2�
Press ≥ to enter the Stop time menu.
3�
Use < or > , ≥ or ≤ to select and enter the
menu items to set.
4�
Press oK to confirm.
5�
Press menu to exit.
20

lock tV channels or connected devices

(auto lock)

Lock TV channels or connected devices with a four digit
code to prevent children from watching unauthorised
content�

to set or change the auto lock code

1�
Press menu on the remote control and select
Features > auto lock > Change code.
2�
Press ≥ to enter the code setup.
3�
Enter your code with the number buttons.
The Features menu reappears with a message
confirming that your code is created or changed.
note
• If you forget your code, enter '0711' to override any existing
codes�

to enter the auto lock menu

1�
Press menu on the remote control and select
Features > auto lock and press > to enter your
code.
2�
Enter your code with the number buttons.

to unlock all channels and connected

devices

1�
In the auto lock menu, select Clear all
2�
Press oK.

to set parental ratings

Some digital broadcasters rate their programs according
to age� You can set your TV to display only programs
with age ratings higher than your child's�
1�
auto lock menu, select parental rating.
In the
2�
Press ≥ to enter.
3�
Press < or > to select age rating.
4�
Select the age and Press
5�
Press menu to exit the menu.
�
oK.