Change The Time Zone; Set The Clock; Automatically Switch The Tv Off (Off Time); Automatically Switch The Tv To Standby (Sleep Timer) - Sharp LC-19SH7E-BK Operation Manual

tV menu
Zoom 2 (not for HD)
Wide
note
• When source input is PC mode, only Full screen and 4:3
are available.
• For 4:3 PC input signal, picture format 4:3 and Wide
screen are available.
• For other input signals, only Wide screen is available.

Change the time zone

1�
Press menu / eXit on your remote control and
select Features > time.
2�
oK or ≥ to enter time.
Press
3�
time zone and press ≤≥ to select your
Select
time zone.
4�
Follow the on-screen instructions to exit.

Set the clock

1�
Press menu / eXit on the remote control and
select Features ≥ time.
2�
Press oK or ≥ to enter time menu.
3�
<> to select time and press oK or ≥
Press
to enter.
Menu
Picture
Auto Synchronization
Date
Sound
Time
TV
Timer
Features
Off Time
Parental
Eco
Select EXIT Back
16
Scales the classic 4:3
format to 16:9.
Stretches the classic 4:3
format to 16:9.
Off
2009/10/10
16: 52: 38
On
17: 52: 38
4�
Select
auto Synchronization
select:
• on: Sets the clock automatically the same with
the digital signal time. (Only if digital signal is
available).
• off: Press <> to set your system Date or
system time manually by using the digit
buttons on your remote control.
5�
When the clock setting is completed, follow the
on-screen instructions to exit.

automatically switch the tV off (off time)

Off time switches the TV to standby at a specified time.
note
• Before using off time function, you have to set the time
on your TV correctly. (See page 16 "Set the clock")
1�
Press menu / eXit on the remote control and
select Features ≥ time.
2�
oK or ≥ to enter time menu.
Press
3�
<> to select time and press oK or ≥
Press
to enter.
4�
Press > to select
timer
select:
• off: Disable timer.
• on: Press > to highlight the off time box
and set and power off time by using the digit
buttons on your remote control.
5�
Follow the on-screen instructions to exit.
automatically switch the tV to standby
(Sleep timer)
Sleep timer switches the TV to standby after a defined
period of time.
1�
menu / eXit on the remote control and
Press
select Features ≥ time.
2�
oK or ≥ to enter time.
Press
3�
Press <> to select Sleep timer�
4�
Press ≤≥ to select the period of time before
TV enters to standby.
5�
Follow the on-screen instructions to exit.
note
• When you press any button on the remote control with
less than three minutes left in the countdown, Sleep
timer will be automatically canceled.
and press ≤≥ to
and press ≤≥ to