Connecting 5.1 (Five Speakers And A Subwoofer) Audio Speakers - HP Compaq Presario,Presario 930 Getting Started

Hp compaq presario,presario 930: user guide
Hide thumbs Also See for Compaq Presario,Presario 930:
Table of Contents

Advertisement

Connecting 5.1 (Five Speakers and a Subwoofer)
Audio Speakers
20
Getting Started
7
Plug in the speaker system power.
8
Turn on the speaker system.
9
After the speakers are connected to the computer, configure the audio software for
sound output for your computer model. See "Configuring Speaker and Sound
Options."
Type 3: See "Configuring Audio Output with Multichannel Sound Manager."
Type 6: See "Configuring Audio Output with Sound Effect Manager."
Sound card: See "Configuring Audio Output with a Sound Card."
The following diagram shows a typical 4.1 audio installation:
To connect two front speakers, two rear speakers, a center speaker, and a subwoofer for
six-channel (5.1 speaker) output:
1
Turn off the computer.
2
Connect the front speaker cable to the lime green Audio Line Out connector that
matches the back of your computer.
3
6
NOTE:
Type 3 is three connectors.
Type 6 is six connectors.
Type S is sound card.
S

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents