Table of Contents
Advertisement
installing your microwave
oven
INSTALLING YOUR OVEN
Place the oven on a flat level surface 85 cm above the floor. The surface
should be strong enough to safety bear the weight of the oven.
• When you install your oven, make sure there is
adequate ventilation for your oven by leaving at
least 10 cm (4 inches) of space behind and, on
the sides of the oven and 20 cm (8 inches) of
space above.
• Remove all packing materials inside the oven.
Install the support tray and turntable. Check
that the turntable rotates freely.
This microwave oven has to be positioned so that plug is accessible.
• Do not install the microwave oven in hot or damp surroundings like next to a
traditional oven or radiator. The power supply specifications of the oven must be
respected and any extension cable used must be of the same standard as the
power cable supplied with the oven. Wipe the interior and the door seal with a
damp cloth before using your microwave oven for the first time.
• Do not install the microwave oven in hot or damp surroundings like next to a
traditional oven or radiator. The power supply specifications of the oven must be
respected and any extension cable used must be of the same standard as the
power cable supplied with the oven. Wipe the interior and the door seal with a
damp cloth before using your microwave oven for the first time.
caution
CAUTION
• After removing Part "A", Surely remove the
cutting sharp edge for safety. And Please be
careful not to be injured by sharp edge when
working.
12_ installing the oven
CP1395ST_XEU-03749S.indb 12
10 cm
20 cm
behind
above
85 cm of
10 cm on
the floor
the side
Part "A"
Parts "A"
2010-09-18
2:58:35
Advertisement
Table of Contents
