Clarity BT914-R User Manual page 16

1. Press MENU to start the voice guide for the answering
system setup. You hear the voice prompt "Hello! This voice
guide will assist you with the basic setup of your answering sys-
tem."
2. Setup your answering system by inputting the designated
numbers as instructed in the voice guide.
• To skip setting, press the Red phone button.
IMPORTANT:
Check for a dial tone by pressing Green phone/Flash
button. If you hear a dial tone, the installation is successful.
If you do not hear a dial tone:
• Make sure the installation procedures described above are
properly done.
• It may be a wiring problem. If you have changed your
telephone service to digital service from a cable company or
a VoIP service provider, the telephone line may need to be
rewired to allow all existing telephone jacks to work. Con-
tact your cable/VoIP service provider for more information.
16
BEFORE USE