Message Setup - Leadway TKW19S User Manual

Please make sure that the terminal SIM card has opened GPRS function;
Please make sure that the terminal SIM card need to open the caller id function.
VI. Message Setup
All the following function command need setup by lowercase. And every command has reply. If the
parametric command setup is right, it will reply message: "set successfully". If not, need setup again. If
send query command, your mobile phone will reply corresponding information.
7.1 Center Number Setup
You need setup center NO. first, if you need check monitor or other operations by message. The device
only accept message command sent from center NO., so you can setup center NO. by your phone NO.. In
order to ensure the safe using, the setup needs password, so the initial passwords is "123456". Password
can be changed.
Format: pw,123456,center,your phone NO.#
Example: pw,123456,center,13524258458#
If the setup is successful, there will be a reply "Center number set successfully!"
Remark: Only 1 center NO. is allowed.
7.2 APN Setup
Create the SMS "APN,APN name,,#" and send it to the terminal; after executing this command, the
terminal will automatically start and connect to GPRS with APN set.
Format: APN,APN name,,#
Example: apn,cmwap, ,#
If the setup is successful, there will be a reply "APN set successfully!"
7.3 Server connection setting
Command: ip,***.***.***.***,port,****#
Example: ip,59.188.20.67 ,port,7018#
If the command is set successful, the device will reply "IP and port Settings OK"
7.4 Changing Password
The initial password of user name is "123456" and you can also change it. The password need be 6 words.
The command as below:
Format: pw,123456#
Example: pw,888888#
If the setup is successful, the setting mobile phone will receive message "Password set successfully!
PW:888888."
(Note: No space in any words.)
(No space between ",").
("cmwap" is the apn name for China mobile)