Table of Contents
Advertisement
Please turn off the GPS Tracker before insert or take out the SIM card;
Please make sure that the terminal SIM card has opened GPRS function;
Please make sure that the terminal SIM card need to open the caller id function.
VI. Message Setup
All the following function command need setup by lowercase. And every command has reply. If
the parametric command setup is right, it will reply message: "set successfully". If not, need setup
again. If send query command, your mobile phone will reply corresponding information.
7.1 Center Number Setup
You need setup center NO. first, if you need check monitor or other operations by message. The
device only accept message command sent from center NO., so you can setup center NO. by your
phone NO.. In order to ensure the safe using, the setup needs password, so the initial passwords
is "123456". Password can be changed.
Format: pw,123456,center,your phone NO.#
Example: pw,123456,center,13524258458#
If the setup is successful, there will be a reply "Center number set successfully!"
Remark: Only 1 center NO. is allowed.
7.2 APN Setup
Create the SMS "APN,APN name,plmn,provider name#" and send it to the terminal; after
executing this command, the terminal will automatically start and connect to GPRS with APN set.
Format: APN,APN name,plmn,provider name NO.#
Example: apn,cmwap,plmn,46000#
If the setup is successful, there will be a reply "APN set successfully!"
7.3 Changing User Name Password
The initial password of user name is "123456" and you can also change it. The password need be
6 words. The command as below:
Format: pw,123456#
Example: pw,888888#
If the setup is successful, the setting mobile phone will receive message "Password set
successfully! PW:888888."
(Note: No space in any words.)
(This command is suit for China Mobile.)
Advertisement
Table of Contents
