C&T VCO-6000-KBL Series User Manual page 89

Chapter 4: BIOS Setup
■ PEG Port Configuration
❑ PEG 0:1:0
✓ Enable Root Port
This item allows you to enable or disable the Root Port.
✓ Max Link Speed
This item allows you to configure PEG 0:1:0 Max Sped.
❑ PEG 0:1:1
✓ Enable Root Port
This item allows you to enable or disable the Root Port.
✓ Max Link Speed
This item allows you to configure PEG 0:1:1 Max Sped.
❑ Detect Non-Compliance Device
Detect Non-Compliance PCI Express Device. If enable, it will take more time at POST time.
VCO-6000-KBL | User's Manual
89