C&T VCO-6000-KBL Series User Manual page 82

Chapter 4: BIOS Setup
■ Serial Port 4 Configuration
❑ Serial Port
This item will allow users to enable or disable serial port.
❑ Change Settings
This setting is used to change the address & IRQ settings of the specified serial port.
❑ Device Type Select
Change the Serial interface. Select <RS232> ,<RS422> or <RS485> interface.
■ Watch dog Timer
❑ Watch Dog Timer Count Mode
Change the Watch dog mode. Select <Second Mode> or <Minute Mode> mode.
❑ Watch Dog Timer Time Out Value
User can set a value in the range of 0 to 255.
VCO-6000-KBL | User's Manual
82