HP Compaq nx9500 Series Maintenance And Service Manual page 126

1. Prepare the notebook for disassembly
remove the following components:
❏
❏
❏
❏
❏
2. Release the ZIF connector 1 to which the SD Card
slot/infrared module cable is attached, and then disconnect
the cable 2.
3. Disconnect the right 3 and left 4 speaker cables from the
system board.
Disconnecting the SD Card Slot/Infrared Module and Speaker
Cables from the System Board
Maintenance and Service Guide
Optical drive (Section
Keyboard (Section
Keyboard cover
Display assembly
Top cover (Section
Removal and Replacement Procedures
5.7)
5.8)
(Section 5.9)
(Section 5.10)
5.11)
(Section 5.3) and
5–31