Denon AVR-X1600H Owner's Manual page 89

Contents Connections
Listening to FM broadcasts
1
Connect the antenna. ("Connecting a DAB/FM antenna
(for FM/DAB model only)" (v p. 62))
2
Press TUNER to switch the input source to "Tuner".
3
Press OPTION.
The option menu screen is displayed.
4
Use ui to select "FM/DAB", then press ENTER.
This displays the reception band input screen.
5
Use o p to select "FM", then press ENTER.
FM:
DAB:
See "Listening to DAB broadcasts" (v p. 95) for information on
0
playing DAB.
Front panel Display
Playback
When listening to an FM broadcast.
When listening to a DAB broadcast.
Rear panel
Settings
Tuner
Tune
GDisplay of this unitH
01 FM 87.50MHz
6
Press TUNE + or TUNE – to select the station you want
listen to.
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
0 The modes for receiving FM broadcasts consists of "Auto" mode that automatically
searches available broadcast stations and "Manual" mode that lets you tune in
using buttons to change the frequency. The default setting is "Auto". You can also
use "Direct Tune" to tune in by entering the frequency directly.
In "Auto" mode, you cannot tune in to radio stations if the reception is not good.
If this is the case, then use the "Manual" mode or "Direct Tune" mode to tune in.
89
Remote
Tips Appendix
G TV screen H
AUTO AUTO
FM 87.50MHz
CH 1
Preset Option
OPTION OPTION
Index