Denon AVR-X1600H Owner's Manual page 149

Contents Connections
Changing the settings
1
Set the items below to the settings you want to
register.
The following settings from A to H can be memorized for MAIN
ZONE, and settings A and B can be memorized for ZONE2.
A Input source (v p. 67)
B Volume (v p. 68)
C Sound mode (v p. 130)
D Audyssey (Audyssey MultEQ
Audyssey Dynamic Volume
E "Restorer" (v p. 168)
F "Adjusting the volume of each channel to match the input source
(Ch Level Adjust)" (v p. 126)
G "Displaying your desired video during audio playback (Video
Select)" (v p. 128)
H "All Zone Stereo" (v p. 129)
0 Press and hold QUICK SELECT while a radio station is being received is
being played back with any of the following sources, the current radio
station is memorized.
0 Tuner / Internet Radio Station
Front panel Display
Playback
® XT, Audyssey Dynamic EQ ®
® ) (v p. 171)
Rear panel
Settings
2
Press MAIN or ZONE2 to select the operating zone with
the remote control.
The button for the selected zone is lit.
3
Press and hold the desired QUICK SELECT until
"Quickz Memory" or "Z2 Quickz Memory" appear on
the display.
The current settings will be memorized.
z is displayed the number for the QUICK SELECT button you
pressed.
,
o Changing the Quick Select Name
The MAIN ZONE Quick Select name displayed on the TV screen or
display of this unit can be changed to a different name.
For the name change method, see "Quick Sel.Names". (v p. 221)
149
Remote
Tips Appendix
Index