Denon AVR-X1600H Owner's Manual page 171

Contents Connections
Audyssey ®
Set Audyssey MultEQ XT, Audyssey Dynamic EQ
®
Dynamic Volume . These can be selected after Audyssey
®
been performed.
For additional information on Audyssey technology, please see
"Explanation of terms" (v p. 268).
0 "MultEQ ® XT", "Dynamic EQ", "Ref.Lev.Offset" and "Dynamic Volume" settings are
stored for each input source.
0 When the sound mode is in the "Direct" mode, "MultEQ
"Dynamic Volume" settings cannot be configured.
0 When the sound mode is in "DTS Virtual:X" or sound mode that have "+Virtual:X"
in the sound mode name, "MultEQ
settings cannot be configured.
Front panel Display
Playback
and Audyssey
®
Setup has
®
® XT", "Dynamic EQ" and
® XT", "Dynamic EQ" and "Dynamic Volume"
Rear panel
Settings
o MultEQ ® XT
MultEQ ® XT compensates for both time and frequency characteristics
of the listening area based on Audyssey
Selection is done from three types of compensation curves. We
recommend the "Reference" setting.
Reference
(Default):
L/R Bypass:
Flat:
Off:
0 When using headphones, "MultEQ
171
Remote
Tips Appendix
® Setup measurement results.
Selects the default calibrated setting with
a slight roll off at high frequencies, which
is optimized for movies.
Selects the reference setting, but
bypasses MultEQ ® XT on the front left
and right speakers.
Selects the calibrated setting which is
optimized for small rooms where your
listening position is closer to the
speakers.
Do not use "MultEQ XT".
®
® XT" is automatically set to "Off".
Index