Step 4: Set Up The Software - HP Compaq NC4400 Getting Started Manual

First-time setup

Step 4: Set up the software

After the computer is turned on, it will go through a brief
software setup. Follow the on-screen instructions to set up the
software. Note the following:
■
After you respond to the setup prompt, you must complete
the entire setup process without interruption. Setup time
varies.
■
During software setup, the computer may pause periodically
for several minutes. These normal pauses are indicated by an
hourglass icon.
CAUTION: If you are prompted to select an operating system language
Ä
before the Welcome to Windows page is displayed, choose
carefully. On some models, the languages that you do not choose are
deleted from the system and cannot be restored during software setup.
✎
To register the operating system and the computer, you must be
connected to the Internet. For more information about connecting
to the Internet, refer to Appendix B,
from your
software setup, you can do so at any time after software setup is
complete.
1–12
home," in this guide. If you do not register during
"Connect to the Internet
Getting Started