Design Information; Models Available; Optional Accessories; Tools And Materials Required - Monogram ZDIS15 Design Manual With Installation Instructions

MODELS AVAILABLE

ZDIS150HSSLH, ZDIS150HSSRH, and ZDIC150HBB
Available in black and stainless steel.

OPTIONAL ACCESSORIES

For the installation of a trimless
3/4" thick custom panel on black models (not for
stainless steel models). This kit provides a handle
that can be installed with the custom panel.
A custom handle of your choice may be installed onto
the 3/4" panel. See installation instructions
on pages 10 and 11.
TOOLS AND MATERIALS REQUIRED FOR BASIC INSTALLATION
• 1/4" socket
• 3/4" adjustable wrench
• Level
• GE SmartConnect Refrigerator Tubing Kit or 1/4" O.D.
™
copper tubing, of sufficient length to reach the installation
• Flat-blade screwdriver
• 7/16" and 1/2" open-end wrenches or 2 adjustable wrenches
• 1/4" nut driver

Design Information

The ice maker may be installed below a countertop
or used free-standing.
ZPK2 Drain Pump Kit - For use when a floor drain is
not available. The drain pump must be installed
inside the unit and can pump discharge water at a
maximum vertical height of 10 feet. 10 feet of tubing
is supplied with the kit.
3