Design Information; Models Available; Optional Accessories; Tools And Materials Required - Monogram ZDIC150 Installation Instructions Manual

MODELS AVAILABLE

ZDIC150ZBB, ZDIS150ZSS
Available in black and stainless steel.

OPTIONAL ACCESSORIES

For the installation of a trimless
3/4" thick custom panel on black models (not for
stainless steel models). This kit provides a handle
that can be installed with the custom panel.
A custom handle of your choice may be installed onto
the 3/4" panel. See installation instructions
on pages 10 and 11.
TOOLS AND MATERIALS REQUIRED FOR BASIC INSTALLATION
Refrigerator Tubing Kit or 1/4" O.D.
™
copper tubing, of sufficient length to reach the installation

Design Information

The ice maker may be installed below a countertop
or used free-standing.
ZPK2 Drain Pump Kit - For use when a floor drain is
not available. The drain pump must be installed
inside the unit and can pump discharge water at a
maximum vertical height of 10 feet. 10 feet of tubing
is supplied with the kit.
3