Set Up The Computer - HP Compaq NC2400 Getting Started

Set up the computer

To set up the computer, you will
1. Insert the battery into the computer.
2. Connect the computer to external power.
✎
3. Turn on the computer.
4. Set up the software.
5. Create recovery discs (recommended).
✎
Ä
CAUTION: To prevent file corruption and to ensure that the correct drivers
are installed:
■�
Do not set up the computer for the first time while the computer is
docked in an optional docking device.
■�
During the hardware and software setup procedures:
❏�
❏�
Getting Started
The battery begins to charge.
Refer to Appendix C, "
instructions.
Do not unplug the computer from external power.
Do not shut down the computer or initiate standby or
hibernation.
Backup and recovery
First-time setup
," for
1–3