Hotpoint Ariston BCB 311/HA Operating Instructions Manual page 15

Ice Care.
The Easy Ice trays are set into the top part of the freezer
drawers to maximise the space within the freezer. The
trays are drip-free and sealed to prevent food from tainting
the ice cubes.
1. Check that the tray is completely empty and fill it with
water through the opening provided.
2. Take care not to exceed the level indicated (MAX
WATER LEVEL). Excess water prevents the ice cubes
from dispensing (if this happens, wait for the ice to melt
and empty the tray).
3. Turn the tray 90°: due to the connected compartments
each mould fills with water (see diagram).
4. Close the opening with the lid provided and put the tray
back.
5. When the ice has formed (minimum time approximately 8
hours) knock the tray against a hard surface and wet the
outside so that the ice cubes come loose and take them
out through the opening.
MAX
WATER LEVEL
GB
15