Lexus UX 250h 2020 Owner's Manual page 181

■ Automatic light off system
When the headlights come on: The head-
●
lights and tail lights turn off 30 seconds
after a driver's door is opened and closed
if the power switch is turned to ACC or
OFF. (The lights turn off immediately if
on the key is pressed after all the
doors are locked.)
● When only the tail lights come on: The tail
lights turn off automatically if the power
switch is turned to ACC or OFF. and the
driver's door is opened.
To turn the lights on again, turn the power
switch to ON, or turn the light switch off
once and then back to
■ Automatic headlight leveling system (if
equipped)
The level of the headlights is automatically
adjusted according to the number of pas-
sengers and the loading condition of the
vehicle to ensure that the headlights do not
interfere with other road users.
Windshield wiper linked headlight illu-
■
mination
When driving during daytime with the
headlight switch turned to
the windshield wipers are used, the head-
lights will turn on automatically after several
seconds to help enhance the visibility of
your vehicle.
12-volt battery-saving function
■
In order to prevent the 12-volt battery of the
vehicle from discharging, if the headlights
and/or tail lights are on when the power
switch is turned off the 12-volt battery sav-
ing function will operate and automatically
turn off all the lights after approximately 20
4-3. Operating the lights and wipers
minutes. When the power switch is turned
to ON, the 12-volt battery-saving function
will be disabled.
When any of the following are performed,
the 12-volt battery-saving function is can-
celed once and then reactivated. All the
lights will turn off automatically 20 minutes
after the 12-volt battery-saving function has
been reactivated:
●
●
■
The parking and tail lights automatically
turn on at night when the doors are
unlocked using the entry function or wire-
less remote control if the light switch is in
the
■
Settings (e.g. light sensor sensitivity) can be
changed. (Customizable features: P.440,
440)
or .
■
Do not leave the lights on longer than
necessary when the hybrid system is not
operating.
position, if
1
When the headlight switch is operated
When a door is opened or closed
Welcome light illumination control
position.
Customization
NOTICE
To prevent 12-volt battery discharge
Turning on the high beam head-
lights
With the headlights on, push the
lever away from you to turn on the
high beams.
179
4