Head Restraints - Lexus UX 250h 2020 Owner's Manual

136
3-3. Adjusting the seats
Recall procedure
■
1
Make sure that the doors are
locked before recalling the driving
position. Carry the electronic key
that has been registered to the driv-
ing position, and then unlock and
open the driver's door using the
smart access system with push-but-
ton start or wireless remote control.
The driving position will move to the
recorded position (not including the steer-
ing wheel and head-up display [if
equipped]). However, the seat will move to
a position slightly behind the recorded
position in order to make entering the vehi-
cle easier.
If the driving position is in a position that
has already been recorded, the seat and
outside rear view mirrors will not move.
2 Turn the power switch to ACC or
ON, or fasten a seat belt.
The seat, steering wheel and head-up dis-
play (if equipped) will move to the
recorded position.
Recalling the driving position using the
■
memory recall function
● Different driving positions can be regis-
tered for each electronic key. Therefore,
the driving position that is recalled may
be different depending on the key being
carried.
If a door other than the driver's door is
●
unlocked with the smart access system
with push-button start, the driving posi-
tion cannot be recalled. In this case, press
the driving position button which has
been set.
Customization
■
The unlock door settings of the memory
recall function can be customized. (Cus-
tomizable features: P.439)

Head restraints

Head restraints are provided for all
seats.
WARNING
Head restraint precautions
■
Observe the following precautions
regarding the head restraints.
Failure to do so may result in death or
serious injury.
● Use the head restraints designed for
each respective seat.
● Adjust the head restraints to the cor-
rect position at all times.
● After adjusting the head restraints,
push down on them and make sure
they are locked in position.
● Do not drive with the head restraints
removed.
Vertical adjustment
Front seats
■
1
Up
Pull the head restraints up.
2
Down
Push the head restraint down while press-
ing the lock release button .
A