Table of Contents
Advertisement
Using the Wake on touch Function
You can wake up your monitor from sleep mode through touch. To use the function:
•
Setting OSD.
Press
to open the main OSD menu.Use
function Then you can use
Use
function
Monitor Controls
Advanced Settings
Port Settings
Menu Settings
Exit
Input Signal: DisplayPort
•
Setting Computer.
Open the Device Manager window by clicking Start, Control Panel, Device Manager icon.
Click the HID-compliant device button to open the HID-compliant device Properties window.
Select Allow this device to wake the computer
or
to select Wake on touch and press
or
to
select On
TIO22Gen4Touch
®
Input Signal
DisplayPort
DP Select
DP 1.2
Waken on Touch
Off
Resolution: 1920x1080
or
to select
and press
Refresh Rate: 60Hz
to access that
to access that
2-10
Chapter 2.
Advertisement
Table of Contents
