Placing Large Size Originals - Epson WorkForce DS-32000 User Manual

Placing Originals
>
Note:
❏ You can scan various long paper in the following resolutions.
Approx. 1346 mm (53 in.) or less: up to 600 dpi
Approx. 5461 mm (215 in.) or less: up to 300 dpi
Approx. 5588 mm (220 in.) or less: up to 200 dpi
❏ You need to specify the size of the long paper original in Epson Scan 2. Open the Epson Scan 2 window.
You can specify the paper size of the long paper in the following three ways:
- If the paper length is 3,048 mm (120 in.) or less, you can select Auto Detect (Long Paper) to detect the size
automatically.
- If the paper length exceeds 3,048 mm (120 in.), select Customize and specify the length and the width.
- If the paper length is 5,461 mm (215 in.) or less, you can select Detect paper length to detect only the length
automatically. If the paper is longer than 5,461 mm (215 in.), specify both the length and the width of the paper.
See Document Capture Pro help on how to specify the settings of Epson Scan 2 from Document Capture Pro.
❏ Support the long paper at both ends with your hands to prevent it from falling off the ADF or being stacked and
jammed or dropped from the output tray.

Placing Large Size Originals

Large size originals refer to originals of a size larger than A3 and equal to or smaller than A2.
1. Set the feed selector to
If you set it to

Placing Large Size Originals

(Manual Feed).
(Delicate Feed), you can scan the Carrier Sheet in the Delicate Feed Position.
61