Collect Tools - Cisco Meraki MR20-HW Installation Manual

4. Click on the "Uplink Configuration" tab. Log in. The default login is the serial
number (e.g. Qxxx-xxxx-xxxx), with no password (e.g., Q2DD-551C-ZYW3).
5. Configure the static IP address, net mask, gateway IP address and DNS servers
that this AP will use on its wired connection.
6. If necessary, reconnect the AP to the LAN.
Static IP via DHCP Reservations
Instead of associating to each Meraki AP individually to configure static IP addresses, an
administrator can assign static IP addresses on the upstream DHCP server. Through
"DHCP reservations," IP addresses are "reserved" for the MAC addresses of the Meraki
APs. Please consult the documentation for the DHCP server to configure DHCP
reservations.

Collect Tools

You will need the following tools to perform an installation: