Creating A Command Mode Shortcut - Compaq Armada 7300 Command Manual

N :
OTE
Numeric characters are followed
by a carriage return.
N :
OTE
The word modem comes from the
process of MOdulation/
DEModulation.
N :
OTE
The escape code sequence (+++)
must be typed within one second,
or as defined in the Escape Code
Guard Time found in S12.
NOTE: To hang up the modem,
type ATH0 and press Enter.
: 3
(cont.)
+,7( $3(5
.
.
.
.
.
V0 for numeric characters.
.
.
.
Using Online Mode
.
.
In the online mode, the transmitting modem receives characters from the computer, converts the
.
data to analog signals then transmits these signals over the telephone line.
.
.
The process of altering a signal for transmission is called modulation. The receiving modem
.
receives analog signals from the telephone when in the online mode and converts or demodulates
.
the signal, returning it to the digital form that can be used by the computer.
.
.
.
Escaping from an Online Session to the Command Mode
.
.
Use the following steps to break out of a data transfer session (online mode) and return to
.
.
command mode:
.
Press and hold the Shift key and type +++
.
.
An OK result code is displayed.
.
.
Enter modem commands as needed.
.
.
Resume online session by entering AT0 command or terminate the connection with the ATH0
.
command.
.
.
.

Creating a Command Mode Shortcut

.
.
An easy way to issue commands to the modem is via HyperTerminal, included with Windows 95
.
and Windows NT. You can create a shortcut for accessing HyperTerminal and sending
.
. commands to the modem. To create a command mode shortcut on the Windows desktop:
.
1. Create a Command Mode icon.

.
.
2. From the HyperTerminal dialog box, click the Command icon.

.
.
3. Click File==>Create Shortcut

.
or
.
Click the right mouse button.
.
.
A Command Mode Shortcut icon is displayed.
.
.
4. Click and drag the shortcut icon to the desktop.

.
.
5. To quit HyperTerminal, click File==>Exit.

.
.
.
.
.
.
.
.
.
.
.
.
.