Function Descriptions; Transceiver Password - Kenwood NX-1200AV User Manual

For details on functions that are not included in "FUNCTIONS OVERVIEW"
{p. 23} and "FUNCTION DESCRIPTIONS", please consult your dealer.
LCD Model
If the transceiver is password protected, "PASSWORD" will appear on the
display when the power is turned on. To unlock the transceiver, enter the correct
password.
1 Press the button programmed as [Transceiver Password] to enter Transceiver
Password Mode.
Alternatively, press the button programmed as [Menu] to enter Transceiver
•
Password Mode using the Menu Mode.
If a password has been registered and the [Transceiver Password]
•
function has not been programmed to a button or configured to the menu,
the transceiver enters Transceiver Password Mode when the power is
turned on.
2 Enter a number using the [ <B ] and [ C> ] buttons.
• On full button model, you can enter the password directly by pressing the
keypad.
3 Press the [ S ] or [
4 Repeat steps 2 and 3 to enter the entire password.
• Press the [ A ] or [ # ] button to delete an incorrectly entered number.
Press and hold the [ A ] or [ # ] button to delete all numbers.
5 Press the [ S ] or [
• If you enter an incorrect password, an error tone sounds and the
transceiver remains locked, the transceiver will return to "PASSWORD"
display.
• The password can contain a maximum of 6 digits.

FUNCTION DESCRIPTIONS

TRANSCEIVER PASSWORD

] button to accept the number.
] button to confirm the entry.
66