Advertisement
Available languages
Available languages
the inner frame do not require cleaning.
However; depending on usage, it is re-
commended that you replace them after
a certain period of time.
MAINTENANCE
Replacing the Oven Light
WARNING: The maintenance of
this appliance should be carried
out by an authorised service
person or qualified technician
only.
WARNING: Switch off the
appliance and allow it to cool
before cleaning your appliance.
•
Remove the glass lens, then remove
the bulb.
•
Insert the new bulb (resistant to 300
°C) to replace the bulb that you
removed
(230 V, 15-25 Watt, Type E14).
•
Replace the glass lens, and your
oven is ready for use.
•
The product contains a light source
of energy efficiency class G.
•
Light source can not be replaced by
end user. After sales service is
needed.
•
The included light source is not
intended for use in other
applications.
Replaceable light source
by a professional
The lamp is designed specifically
for use in household cooking
appliances. It is not suitable for
household room illumination.
SERVICE AND
TRANSPORT
REQUIREMENTS BEFORE
CONTAINING TO SERVICE
If the oven does not operate :
The oven may be plugged off, there
has been a black out. On models itted
with a timer, time may not be
regulated.
If the oven does not heat :
The heat may be not adjusted
with oven's heater control switch.
If the interior lighting lamp does not
light :
The electricitiy must be controlled.
It must be controlled whether the
lamps are defective. If they are
defective, you can change them as
following the gu-ide.
Cooking (if lower-upper part does
not cook equally) :
Control the shelf locations, cooking pe-
riod and heat values according to the
manual.
Except these, if you still have any prob-
lem with your product, please call to the
"Authorized Service".
EN - 19
Advertisement
