Sharp K-71F28BM2-EU User Manual page 18

Then, touch the MODE sensor button until
you see the Cooking End Time symbol
on the Time display. The time of day and
the Cooking Duration Time symbol will
flash. Set the required finish time using
the PLUS and MINUS sensors while the
timer is in this position. When you have
completed the adjustment, wait until the
current time of day is displayed and until
the Cooking End Time symbol remains
illuminated.
The oven will calculate the operating time
by deducting the cooking period from the
set finishing time, at which it will stop
operating. The timer will give an audible
warning and the Cooking End Time symbol
will flash. Touching any button on the timer
will end the audible warning.
Digital Timer Sound Adjustment
To alter the warning signal sound, while the
Time display shows the time of day, press
and hold the MINUS sensor button for 2
seconds until there is an audible signal
sound. After this, each time the MINUS
sensor is pressed, a different signal will
sound. There are three different types of
signal sound. Select the desired sound
and do not press any other buttons. After
a short time, the selected signal sound
will be saved.
Boost Function
This function is used to shorten the
preheating time. The BOOST sensor will
illuminate when the Turbo, Fan, Static
or Pizza functions are selected. To save
preheating time, touch the BOOST sensor
button before starting a cooking operation.
Use this function to heat the oven the
desired temperature as quickly as
possible. This mode is not appropriate
for cooking.
Key Lock Function
The key lock is used to avoid unintentional
changes to oven settings.
To activate the key lock, touch the KEY
LOCK sensor button for 2 seconds until
you see Key Lock symbol on the display.
To deactivate the key lock, touch the KEY
LOCK sensor for 2 seconds until the key
lock symbol disappears from the display.
When the key lock is engaged, only the
ON/OFF sensor button can be activated.
All other buttons will remain locked.
EN - 15