Comtrend Corporation NexusLink 3240u User Manual page 85

To remove queues, check their remove-checkboxes (for user created queues), then
click the Remove button.
The Enable button will scan through every queue in the table. Queues with the
enable-checkbox checked will be enabled. Queues with the enable-checkbox
un-checked will be disabled.
The enable-checkbox also shows status of the queue after page reload.
Note that if WMM function is disabled in the Wireless Page, queues related to
wireless will not take effect. This function follows the Differentiated Services rule of
IP QoS. You can create a new Queue entry by clicking the Add button.
Enable and assign an interface and precedence on the next screen. Click
Save/Reboot on this screen to activate it.
Click Add to display the following screen.
Name: Identifier for this Queue entry.
Enable: Enable/Disable the Queue entry.
Interface: Assign the entry to a specific network interface (QoS enabled).
After selecting an Interface the following will be displayed.
84