To Use Manual Power Management - HP 2000-219 User Manual

CAUTION
System standby
Action Turns off the display and hard disk drive to
conserve battery power. Saves current
session to RAM.
When No activity of the keyboard or mouse, no
disk drive access, and no port (serial,
parallel, and IR) activity for the specified
interval.
Resume Press the blue power button to return to
your current session.
A message box appears 15 seconds before system standby takes effect. This allows you
to stop the process and save your work if you have not recently done so. (In Windows 98
and ME, there is no difference between Standby and Suspend.)
Make a habit of saving your work before allowing your computer to go to system
standby. If there is an interruption in power while the computer is in standby,
information that has not been saved will be lost.
You can also create power schemes which will automatically shut down the computer
components after a specified period of non-use. Define these schemes so that they best
support the ways in which you use your Pavilion Notebook.
To set power management properties:
1. Click Start, Settings, Control Panel, Power Management (Power Options in Windows
ME). For details see Windows help.
2. If you don't want a particular timeout to occur, set the value to Never.
3. Click Apply to activate your changes without closing the window.
–or–
Click OK.

To use manual power management

You can shut down your computer manually whenever you need to with any of the
following three levels of shutdown.
Traveling with Your Computer
Managing Power Consumption
User's Guide 51