1. Introduction This document describes the hardware of the MBR-1100 and terms of IAdea Limited Warranty. 1.1. Package contents AC Adapter Media Player Unit Ethernet cable Wi-Fi Antenna (with select power plug) HDMI extension ADB USB cable cord INCLUDED: A USB mouse is required for system setup...
1.2. Physical view Physical features (left to right in above illustration) HDMI 1.4 connector for digital video and audio combined output ADB , Android debug console port Micro USB for power adapter Power and Status LED indicator ...
Plug in Ethernet cable (optional) Connect player to power via micro USB port with power adapter 3. Software Operation 3.1. System boot-up After the power is supplied for approximately 40 seconds, the booting animation will be displayed on screen as shown below : The boot-up process takes approximately 75 seconds to complete.
Page 6
(Fig. 2.2.1) Basic settings: – Network, Time zone and Content. Each time the Basic settings menu is entered, playback will automatically begin after 15 seconds if content services have been previously set. Auto playback can be canceled by clicking on the button before the countdown ends.
IAdea reseller. Subject to the conditions of this warranty, IAdea will perform necessary service on the product without charge for parts or labor if, in the opinion of IAdea, the product is found to be faulty within the warranty period. IAdea’s sole warranty and obligation will be to repair or replace (at it sole discretion) such products that require warranty during the applicable warranty period in accordance with these conditions.
Page 9
FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.