Table of Contents
Advertisement
Chapter 10
•
Group Key Update Period:
for the encryption key automatic renewal. The default is 0, indicating no key renewal.
•
WMM:
This feature guarantees the packets with high-priority messages being
transmitted preferentially. WMM is enabled compulsively under 802.11n or 802.11ac
mode.
•
Short GI:
This feature is enabled by default and recommended to increase the data
capacity by reducing the Guard Interval (GI) time.
Note:
If you are not familiar with the settings mentioned above, it's strongly recommended that you keep the provided default
settings; otherwise it may result in lower wireless network performance.
¾ To enable WDS bridging function:
Locate the
WDS
section and select the
the information of the router to be bridged. Refer to
¾ To enable or disable WPS function:
WPS (Wi-Fi Protected Setup) provides you with an easier approach to set up a security-
protected Wi-Fi connection. This function is enabled by default, but if you do not need
this function, clear the WPS
¾ To create multi-SSID network:
The router supports additional up to three multi-SSID wireless networks for client
access in each wireless band. You can specify the access and security settings to
ensure network security and privacy according to your situation.
1 ) Locate the
corresponding setup page.
2 ) Select the
Enable SSID 1 (2
multi-SSID network.
Enter the number of seconds to control the time interval
Enable WDS Bridging
Enable
check box and then click Save.
Multi-SSID
section, and click
or 3) check box(es) to enable the corresponding
Customize Your Network Settings
check box. And then set
FAQ
for detailed instructions.
2.4GHz
or
5GHz
to open the
64
Hide quick links:
Advertisement
Table of Contents
