Table of Contents
Advertisement
Table of Contents
Regulatory Information ................................................................ 3
Description of Warning Symbols .................................................. 4
Safety Notices ............................................................................. 5
Important Safety Instructions ....................................................... 6
Preface ....................................................................................... 9
Warranty and Service .................................................................. 9
1. Getting Started ...................................................................... 12
1.1 Package Contents ........................................................... 12
1.2 Introducing the TV ........................................................... 13
1.2.1 Features ................................................................ 13
1.3 Control Panel .................................................................. 14
1.4 Input and Output Jacks .................................................... 15
1.5 Remote Control ............................................................... 16
1.6 Inserting the Remote Control Batteries ............................. 19
2. Setting up your TV ................................................................. 20
2.1 Basic Connections ........................................................... 20
2.1.1 Power Connection .................................................. 20
2.1.2 Connecting an Antenna or Cable TV ........................ 20
2.2 Connecting External Devices ........................................... 21
2.2.1 Connecting External Earphones .............................. 21
2.2.2 Connecting to AV Devices ....................................... 22
Using Component Video ......................................... 23
Using Composite Video ........................................... 23
2.2.5 Connecting a PC using VGA ................................... 24
2.2.6 Connecting a PC using DVI ..................................... 24
2.2.7 Connecting HDMI ................................................... 25
2.2.8 Connecting USB ..................................................... 25
2.3 Using the TV ................................................................... 26
2.3.1 Turning the TV On and Off ...................................... 26
2.3.2 Switching Source Signals ........................................ 26
2.3.3 Performing an Automatic Channel Search ................ 26
2.3.4 Selecting Channels ................................................. 26
2.3.5 Adjusting the Volume .............................................. 26
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HANNspree ST289MUB
Summary of Contents for HANNspree ST289MUB
-
Page 1: Table Of Contents
2. Setting up your TV ... 20 2.1 Basic Connections ... 20 2.1.1 Power Connection ... 20 2.1.2 Connecting an Antenna or Cable TV ... 20 2.2 Connecting External Devices ... 21 2.2.1 Connecting External Earphones ... 21 2.2.2 Connecting to AV Devices ... 22 2.2.3 Connecting a VCR/ STB/ DVD Player... - Page 2 6.2 Other Descriptions ... 42 6.2.1 Double Clicking ... 42 6.2.2 Buttons Information ... 42 6.2.3 Power-out Protection Capability ... 42 6.3 Component Program Codes ... 43 7. Setting the TV on the Wall ... 50 8. Using the Cable Organizer ... 51...
-
Page 3: Regulatory Information
Regulatory Information FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 4: Description Of Warning Symbols
This symbol is used to alert users to pay attention to important descriptions regarding usage, maintenance (repair), and additional important information related to this TV. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION This symbol is used to alert users... -
Page 5: Safety Notices
Safety Notices Installation Safety Notes Location Avoid allowing the TV to get prolonged exposure to sunlight or other strong sources of heat. Leave sufficient distance between the TV and the wall to provide enough space for the emission of heat. -
Page 6: Important Safety Instructions
Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. - Page 7 Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Page 8 5. If any fluid is sprayed or dropped into the TV, contact an authorized service technician. 6. The screen of the TV is made of glass. Avoid hitting or scraping it. If the screen is broken, do not touch the broken glass.
-
Page 9: Preface
The information in this manual is subject to change without notice. To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”) shall not be liable for direct, indirect, special, exemplary, incidental or consequential damages arising from any defect or omission in this manual, even if advised of the possibility of such damages in advance. -
Page 10: Recycling Information
Hannspree. The TV described in this manual may include copyrighted software of Hannspree (or other third parties). Hannspree (or other third parties) preserves the exclusive rights for copyrighted software, such as the right to distribute or reproduce the copyrighted software. -
Page 11: Trademark Notice
Trademark Notice Hannspree products incorporate High-Definition Multimedia Interface (HDMI™) technology. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. License Notice and Trademark Acknowledgment Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby... -
Page 12: Getting Started
Getting Started Package Contents Make sure the following components are included in the box. Please contact Hannspree Customer Service immediately if anything is missing or damaged. • • Power cord • Remote control and batteries • User’s manual • Quick start guide •... -
Page 13: Introducing The Tv
HDMI input ports (location of these ports depends on model). You can also use the TV as a monitor for your PC by connecting it through the VGA port. Convenient control buttons located on the TV and a handy remote control let you change channels, adjust the volume, and change display settings through an easy- to-use on-screen display menu system. -
Page 14: Control Panel
Power/ Standby indicator Speakers Function Power button. Press to turn the TV on or off. Press to open the input source list or mark an item on the OSD menu. Press to open the OSD menu. Press to increase the channel number or move upward to the previous item on the OSD menu. -
Page 15: Input And Output Jacks
VCR, Set-Top-Box, or a DVD player. Connect to earphones or external speakers with built-in amplifiers. PHONE Connect to an antenna or cable TV. Connect to an external device, such as a VCR, Set-Top-Box, or a DVD S-Video player. -
Page 16: Remote Control
RETURN Select channel Volume adjust Function Press to turn the TV on or off. Press to open the input source list. Use to select a channel directly. Press 0-9 to enter the program numbers (press 1 and 0 for channel 10). - Page 17 Press to select a programmed Audio Receiver/ Amp/ Home Theatre System. Press to select a programmed Cable TV set-top box or a satellite TV set-top box. Press to enter TV mode. Press to switch to favorite channels. (if no favorite channel was set, "Not Available!"...
- Page 18 • For best results, use the remote control within a proper distance from the front of the TV. Do not exceed an angle of 30 degrees when pointing at TV. • The operational distance may be shortened when the signal sensor is directly exposed to strong light.
-
Page 19: Inserting The Remote Control Batteries
Inserting the Remote Control Batteries 1 Open the battery compartment cover at the back of the remote control (A). 2 Insert the batteries paying attention to the polarity markings inside the battery compartment (B). 3 Close the battery compartment cover (C). -
Page 20: Setting Up Your Tv
Basic Connections 2.1.1 Power Connection 1 Connect the power cord to the AC IN input jack on the rear of the TV. 2 Insert the plug at the other end of the power cord into a power outlet. 2.1.2 Connecting an Antenna or Cable TV Connect one end of the VHF/UHF (Antenna) or CATV cable to VHF/UHF jack on the rear of the TV. -
Page 21: Connecting External Devices
Connecting External Devices Connect external devices such as VCRs, Set-Top-Box, DVD players, video game consoles, earphones, or a PC to the TV using the appropriate ports on the rear of the 2.2.1 Connecting External Earphones PHONE Note: • External speakers or headphones are not included with the TV. -
Page 22: Connecting To Av Devices
2.2.2 Connecting to AV Devices HDMI 1 HDMI 2 Audio Cable (Optional) HDMI Cable (Optional) HDMI Game Console AUDIO Video Cable (Optional) L VIDEO AUDIO VIDEO S-Video Audio/ Video Cable (Optional) S-VIDEO... -
Page 23: Connecting A Vcr/ Stb/ Dvd Player Using Component Video
2.2.3 Connecting a VCR/ STB/ DVD Player Using Component Video Connect the TV to a VCR/ STB/ DVD player using the component video inputs. 2.2.4 Connecting a VCR/ STB/ DVD Player Using Composite Video Connect the TV to a VCR/ STB/ DVD player using the composite video input. -
Page 24: Connecting A Pc Using Vga
1 Connect the HDMI 1 or HDMI 2 port of the TV to the DVI output of the PC. 2 Connect the PC LINE IN port of your TV to the line out port of the PC of your TV to listen to audio from the PC. -
Page 25: Connecting Hdmi
However, it is necessary to do so if a HDMI to DVI cable is connected. 2.2.8 Connecting USB Connect the USB flash drive to the TV using the USB port as shown. The JPEG and MP3 files are supported. Note: The USB HDD is not supported. -
Page 26: Using The Tv
TV source for channel search. Press OK to confirm. 2.3.3 Performing an Automatic Channel Search Before using the TV to view programs, you need to activate the channel search first. 1 Press MENU on the control panel or remote control, then select to enter the Channel menu. -
Page 27: Editing Channel Table Or Favorite Channel
MUTE 3 Press to eliminate sounds, and press buttons to restore the original volume. 2.3.6 Editing Channel Table or Favorite Channel 1 Press MENU on the control panel or remote control, then select to enter the Channel menu. 2 Select Channel List. 3 If you want to add or remove channel from channel table, please select the channel and press OK to mark "S"... -
Page 28: Adjusting On-Screen Display (Osd) Settings
Settings The On-Screen Display (OSD) menu system provides a quick and simple method to adjust the TV settings. The OSD menu can be accessed through the buttons either on the control panel or the remote control. Before going to details of each OSD item, you may get acquainted with the... -
Page 29: Osd Setting Menus
OSD Setting Menus Follow the instructions indicated on the bottom of the OSD Function Menu. Press on the control panel or through the menus. press INPUT/ VOL+ on the control panel or OK key on the remote control to select an item and then press MENU/ VOL- key to exit the OSD menu. -
Page 30: Adjusting Audio Settings
Adjusting Audio Settings Press MENU to enter the OSD Main Menu screen. Press on the remote control or / CH on the control panel to select Audio menu. Press / OK on the remote control or INPUT/ VOL+ on the control panel to enter the Audio menu. -
Page 31: Adjusting Channel Settings
Table or Favorite Channel” on page 27). •The Antenna can be set to •The Scan Mode can be set to •The Auto Scan can be set to Note: The Channel settings are available when the signal is set to TV source. Antenna Picture Scan Mode Audio... -
Page 32: Adjusting V-Chip Settings
Press RETURN to return to the V-CHIP menu. Press MENU/ VOL- to exit the V-CHIP menu. The V-CHIP menu can set Change Password, Lock, Unrated Block, MPAA , TV Rating, Can. English, and Can. French settings. Note: Super Password Step 1: Input password "7071"... -
Page 33: Adjusting Setup Settings
Analog CC, and CC Style settings. Clock Set is only available for adjustments when Clock Mode is set to Manual; Clock Mode can be set to • Setup Wizard can be used to set up OSD Language, Clock Mode, Time Zone, TV RF Source, and channel scan. -
Page 34: Troubleshooting
Press on the control panel or remote control. • press INPUT to cycle through connected video sources. • Press channel up or channel down to switch to other TV channels. • Make sure all cables are connected properly. • Check the antenna and cable connections. -
Page 35: Specifications
Specifications LCD Panel Size 28 inch TFT Screen Format 16:10 Panel Resolution 1920 (H) x 1200 (V) TV System ATV: NTSC HDMI Input x 2 YPbPr Input x 1 S-Video Input x1 Video System Composite Input x 1 VGA (PC) Input x 1... -
Page 36: Pc Mode Support Timing
PC Mode Support Timing Mode Resolution (active dot) 640x480@60Hz SVGA 800x600@60Hz 1024x768@60Hz SXGA 1280x1024@60Hz WXGA+ 1440x900@60Hz WSXGA+ 1680x1050@60Hz WUXGA 1920x1200@60Hz Video Mode Support Timing Resolution HDMI (active dot) 640x480p@60Hz 720x480i@60Hz 720x480p@60Hz 1280x720p@60Hz 1920x1080i@60Hz 1920x1080p@60Hz Horizontal Vertical Nominal Frequency Frequency Pixel (KHz) (Hz) Clock... -
Page 37: Appendix: Remote Control Guide
TV button for TV; the corresponding indicator light will come on for 2 seconds then it goes off, and now the current electronic equipment mode has been switched to TV. -
Page 38: Searching Codes
6. During the setting process, only digit keys ‘0’ through ‘9’ are valid inputs, while other buttons are deemed invalid and do not affect the code setting. For example, inputting “02” then pressing RETURN does affect the “02” already input. 6.1.3 Searching Codes If the desired electronic equipment code for setting can not be found on the list in the... -
Page 39: Setting Channel Lock
3. While holding the electronic equipment button, press VOL- twice consecutively to cancel volume lock under current mode (for example, if volume lock was set under TV mode and you wish to transmit code values under current DVD mode, just perform this unlock operation, while those electronic equipment modes not operated still have volume locked up). -
Page 40: Factory Setting Mode
3. During the setting process, releasing the electronic equipment button exits the setting mode immediately without changing the status prior to setting. 4. Pressing any of the electronic equipment buttons to enter factory setting operation mode. 5. The default current electronic equipment is TV upon first power-on. Electronic equipment CABLE... - Page 41 Note: Each re-powering restores factory setting, and all electronic equipment modes transmit TV-mode infrared (IR) signal until being set up through code setting. For example, setting the electronic equipment code of CABLE as ‘0001’ stops transmitting TV code, whereas AUDIO and DVD continue to transmit TV code.
-
Page 42: Description
6.1.7 Description There is no multi-function code setting operation under TV mode but a fixed code for the TV manufacturer. Therefore, code setting and code-searching functions are disabled under this mode; other functions such as volume lock, channel lock and code display are operable. -
Page 43: Component Program Codes
2024, 2015 2913, 2004, Curtis Mathes 2020 Cybernex 2024 CyberPower 2102 2010, 2017, Daewoo 2025 Dell 2102 Denon 2008 Direc TV 2059 Durabrand 2007, 2006 Electrohome 2005 Electrophonic 2005 Emerex 2002 2004, 2005, 2021, 2024, 2010, 2018, Emerson 2009, 2022,... - Page 44 2004, 2020 Radix 2005 Randex 2005 Setup Code for VCR’s 2013, 2004, 2024, 2008, 2077 2004, 2005, Realistic 2012, 2011, 2017 Replay TV 2043 Runco 2007 Sampo 2005, 2012 2024, 2010, Samsung 2026 Sanky 2012, 2007 2014, 2022, Sansui 2027...
- Page 45 Setup Code for VCR’s Tashiko 2005 Tatung 2010, 2014 Technics 2004, 2020 2004, 205, Teco 2012, 2006 Teknika 2004, 2005 2048, Tivo 2044, 2098, 2059 2024 2010, 2008, 2014, Toshiba 2009, 2098, 2079, 2102 Totevision 2005, 2024 Touch 2102 Unitech 2024 Vector 2010...
- Page 46 Setup Code for DVD’s Norcent 2078 2029, 2046, Onkyo 2064 Oritron 2051 Panasonic 2028, 2101 2029, 2036, Philips 2050 Pioneer 2033, 2039 Polarold 2090, 2086 Polk Audio 2036 Portland 2062 Proscan 2032 Qwestar 2051 2032, 2039, 2058, 2072 2076 Rotel 2045 Sampo 2061, 2056...
- Page 47 0051 0047, 0043, Samsung 0042 Sony 0025, 0056 Star Choice 0036 Tivo 0044, 0053 0029, 0057, Toshiba 0032, 0048 Ultimate TV 0056, 0051 Uniden 0028, 0027 US Digital 0055 USDTV 0055 Voom 0036 Zenith 0058 Setup Code for CD Aiwa...
- Page 48 Setup Code for CD Carver 3019, 3022 3001 3019 Electronics Dynamic 3022 Bass Fisher 3022 Garrard 3027 Genexxa 3005 Harman/ 3019, 3020 Kardon Hitachi 3005 Integra 3013 3009 3030, 3003, Kenwood 3007, 3006, 3023 Krell 3019 Linn 3019 Magnavox 3019 3030, 3004, Marantz 3019...
- Page 49 Setup Code for Audio Amp / Tuner’s Carver 3042 Denon 3051, 3040 Fonmix 3051 Harman/ 3014 Kardon Hitachi 3047 Integra 3017 3014 3010 Kenwood 3050, 3056 3053 3042, 3046, Magnavox 3029 Marantz 3042, 3046 Onkyo 3035, 3017 3036, 3018, Optimus 3002, 3031, 3029 Proscan...
-
Page 50: Setting The Tv On The Wall
*Installing the LCD TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. Hannspree bears no responsibility for improper mounting or mounting that results in accident or injury. You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall. -
Page 51: Using The Cable Organizer
Using the Cable Organizer Organzie your cables by routing the cables through the cable clamp.
Need help?
Do you have a question about the ST289MUB and is the answer not in the manual?
Questions and answers