Table of Contents REGULATORY INFORMATION... 2 RECYCLING INFORMATION... 4 SAFETY NOTICE ... 5 PREFACE ... 8 BEFORE YOU OPERATE THE MONITOR... 9 FEATURES... 9 CHECKING THE CONTENTS OF THE PACKAGE ... 9 POWER ... 10 CONTROLS AND CONNECTORS... 11 ADJUSTING THE VIEWING ANGLE... 13 OPERATING INSTRUCTIONS...
• Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 4
TCO’03 (TCO’03 applied model only) Some of the features of the TCO’03 Display requirements: Ergonomics • Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, color rendition and image stability.
RECYCLING INFORMATION HANNspree Inc. cares about environmental protection strategies and in using manufacturing methods and treatments that lend themselves to conservation and recycling devices at the end-of-life. Our products, whenever possible, contain recyclable materials which can be recycled into new devices. When necessary for operation, other materials may be classified as hazardous or poisonous substances.
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.
Page 7
• Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a fire or electric shock. Never spill liquids on the monitor. • Do not attempt to service the monitor by yourself; opening or removing covers can expose you to dangerous voltages and other hazards.
Page 8
• Due to the nature of LCD screens, an after image of the previous displayed content may remain if this image has been the displayed for several hours. The LCD screen should recover if the image is changed or powered off for several hours.
The information in this manual is subject to change without notice. To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”) shall not be liable for direct, indirect, special, exemplary, incidental or consequential damages arising from any defect or omission in this manual, even if advised of the possibility of such damages in advance.
BEFORE YOU OPERATE THE MONITOR FEATURES • 19” screen TFT Color LCD Monitor • Crisp, Clear Display • Recommended Resolutions: 19” Wide (16:10) 1440 X 900 19” (5:4) 1280 X 1024 • EPA ENERGY STAR • Ergonomic Design • Space Saving, Compact Case Design •...
Power Cord DVI-D/HDMI Cable (Optional) CD ROM (including User’s manual) * Note: Images are for illustration only and may vary by model or region. POWER POWER SOURCE: Make sure that the power cord is the correct type required in your area.
CONTROLS AND CONNECTORS CABLE CONNECTIONS Turn off your computer before performing the procedure below. Connect one end of the 15-pin D-SUB cable to the back of the monitor and connect the other end to the computer’s D-SUB port. -or- Connect one end of a 19-pin HDMI to the back of the monitor. Connect the other end to the computer's 24-pin DVI-D port.
Page 13
Headphone Jack D-SUB Input Power AC Input AC IN HDMI D-SUB Audio IN Figure 1. Connecting Cables Audio In HDMI Input...
ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when changing the screen's angle.
OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to your personal preferences. •...
FRONT PANEL CONTROL • Power Button: Press this button to switch the monitor on and off. • Power Indicator (LED): Green — Power On mode Orange — Power Saving mode • MENU / ENTER: 1. Activate the OSD menu or adjust the function settings and confirmation.
HOW TO ADJUST A SETTING Main Menu Brightness Main Menu Brightness Main Menu Contrast Main Menu Image Setting Description Brightness adjustment: Select the “Brightness” option from the Main Menu. Press MENU key and adjust the level. In D-SUB input, main menu OSD can show PC input timing.
Image Setting H-Position Image Setting V-Position Image Setting Clock Adjustment Image Setting Phase Adjustment Horizontal position adjustment: Select the “H-position” option to shift the screen image to the left or right. Press MENU key and adjust the level. Vertical position adjustment: Select the “V-position”...
Page 19
How to adjust color: Main Menu Select the “Color Setting” option on the Main Menu and then press MENU. Color Setting...
Page 20
Color Setting 6500K Color Setting User Color Setting 9300 9300K Color Setting User Change Color Settings for D-SUB source: Move the cursor to one of the preset options and select it. Change Color Settings for D-SUB source: Move the cursor to the User option and select it.
Page 21
Main Menu OSD Setting OSD Setting OSD H-Position OSD Setting OSD V-Position OSD Setting OSD Time-out How to set the OSD: Select “OSD Setting” from the Main Menu, and then press MENU key. OSD horizontal adjustment: Select the “OSD H-Position” option to adjust the horizontal position of the OSD.
Page 22
OSD Setting OSD Transparency OSD Setting Language Pycck English Deutsch Francais Espanol Italiano Portugues Nederlands Main Menu Other Setting OSD Transparency setting: Select the “OSD Transparency” option to adjust the transparency of the OSD. Press MENU key and adjust the level. Language: Select the “Language”...
Page 23
Other Setting DDC/CI Other Setting Volume Other Setting Sharpness DDC/CI: When DDC/CI is enabled, users are allowed to configure the software monitor settings in Windows Vista. Select the “DDC/CI” option to enable or disable the DDC/CI support for the Windows OS. Press MENU key to select On or Off.
Page 24
Other Setting DOS Mode 720X400 640X400 Other Setting Factory Preset Main Menu Input Setting HDMI DOS mode: Select the “DOS mode” option to set the monitor for use with PC. Press MENU key and select 720 x 400 or 640 x 400. Recall the factory settings: Select the “Factory Preset”...
Page 25
PLUG AND PLAY ( Plug & Play DDC2B Feature) This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the computer or host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.
TECHNICAL SUPPORT (FAQ) TROUBLE SHOOTING PROBLEM Power LED is not on No Plug & Play or screen image is stretched / seems out of proportion. Picture is dim, too bright or fuzzy Picture bounces or a wave pattern is present in the picture The power LED is ON (orange) but there’s no video or no picture.
Screen image is not centered or sized properly. Picture has color defects (white does not look white) Horizontal or vertical disturbances on the screen ERROR MESSAGE & POSSIBLE SOLUTION • CABLE NOT CONNECTED : 1. Check whether the signal-cable is properly connected. If the connector is loose, tighten the connector screws.
APPENDIX SPECIFICATIONS Model NO. LCD Panel Display size Pixel Pitch Video Input H-Frequency V-Frequency Display Colors Max. Resolution Plug & Play ON Mode ENERGY OFF Mode STAR Audio maximum power output Input Connector Maximum Screen Size Power Source Environmental Considerations M19W4(JM02-19) 19"(16:10) 0.2835(H)x0.2835(V)
Page 31
* Applies to specific compliant models only. Note: Maximum Resolution is dependant on the support of your computer system and video card. Please see http://www.hannspree.com for more information. LM01: 465*193*482 mm LM02(JM02): 485*212*402 mm LM03: 449*293*416 mm...
CONNECTOR PIN ASSIGNMENT • 15-Pin Color Display Signal Cable: PIN NO. DESCRIPTION Green Blue Ground Ground R-Ground G-Ground B-Ground • HDMI Color Display Signal Cable: PIN NO. DESCRIPTION TMDS Data 2+ TMDS Data 2 shield TMDS Data 2- TMDS Data 1+ TMDS Data 1 shield TMDS Data 1- PIN NO.
Page 33
TMDS Data 0+ TMDS Data 0 shield TMDS Data 0- Clock + • 24-Pin Color Display Signal Cable: (Dual Input Mode) PIN NO. DESCRIPTION TMDS Data 2- TMDS Data 2+ TMDS Data 2/4 Shield No Connection No Connection DDC Clock DDC Data TMDS Data 1- TMDS Data 1+...