Controls And Connectors - HANNspree HANNSbaseball User Manual

CONTROLS AND CONNECTORS

CABLE CONNECTIONS
Turn off your computer before performing the procedure below.
1. Connect one end of the 15-pin D-SUB cable to the back of the
monitor and connect the other end to the computer's D-SUB port.
-or-
2. Connect one end of a 19-pin HDMI to the back of the monitor.
Connect the other end to the computer's 24-pin DVI-D port.
-or-
3. Connect one end of a 19-pin HDMI to the back of the monitor.
Connect the other end to an HDMI device, such as a DVD.
* Note: This monitor is capable of operating in 'Dual input' mode. Only one of either the
15-pin D-SUB or the HDMI (via HDMI cable or HDMI to DVI-D adapter) connections is
needed for normal operation.
4. Connect the audio cable between the monitor's audio input and the
PC's audio output (green port). This connection is optional and not
required for normal operation of the monitor.
5. Plug one end of the AC-power cord into the LCD monitor's AC input
socket and the other into a surge protection power strip or device.
6. Turn on your monitor and computer.
11